| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Suspension | Section: Rear Suspension | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003F69000X |
| Title: REAR SUSPENSION: REAR LOWER ARM (for No. 1 Arm): INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. TEMPORARILY INSTALL NO. 1 REAR SUSPENSION ARM ASSEMBLY LH
(a) Align the matchmarks on the No. 1 rear suspension arm and adjust cam.
(b) Temporarily install the No. 1 rear suspension arm with the 3 bolts and 3 nuts.
2. INSTALL REAR SHOCK ABSORBER ASSEMBLY LH
3. STABILIZE SUSPENSION
4. TIGHTEN NO. 1 REAR SUSPENSION ARM ASSEMBLY LH
(a) Tighten the 3 bolts and 3 nuts.
- for nut A
Torque: 250 N·m (2549 kgf·cm, 185 ft·lbf)
- for nut B
Torque: 200 N·m (2039 kgf·cm, 148 ft·lbf)
- for nut C
Torque: 270 N·m (2753 kgf·cm, 200 ft·lbf)
5. INSPECT AND ADJUST REAR WHEEL ALIGNMENT
|
|